Väderstad Carrier 300
» Tillage » Disc cultivators » Carrier 300-400

Carrier 300-400

3-4m

5-12cm

>85hp

125mm

No compromises

Carrier 300-400 is a rigid disc cultivator, available in 3, 3.5 and 4 metre working widths. Depending on configuration, the machine can be delivered either as a mounted or trailed version. Carrier 300-400 mixes in residues, and leaves a perfectly levelled working result. The frame provides a stable and durable machine that sits very close to the tractor, saving on front ballast and reducing the compaction risk.

Click to active 360 product spinner
Part of the Carrier concept

Carrier is a disc cultivator used for high speed primary tillage and seedbed preparation. The wide range of front tools, discs and packers enables Carrier to handle the versatile challenges of modern farming – from ultra-shallow cultivation to a deeper incorporation. The versatility it brings to the farm saves passes, decreases machine cost per hectare and provides the best start possible for the coming crop.

Learn more about the Carrier concept

Selected features

Väderstad Carrier offers impressive weight per disc

Impressive weight per disc

To increase the weight, Carrier 300-400 can be equipped with up to 800kg extra weight.

This results in a weight per metre higher than any competitor’s machine in the same segment.

You benefit from a greater penetration force and exceptional working results in all field conditions.

Read more
Väderstad Carrier with discs according to requirement

Discs according to need

Carrier 300-400 can be fitted with either 450mm discs or 470mm TrueCut discs. Both discs produces fine tilth optimal for a stale seedbed.

The 450mm disc has small cut-outs, resulting in an intensive cultivation also at very shallow working depth. The 470mm TrueCut disc is able to handle more crop residues at the same time as the bigger cut-outs increases penetration. 

Read more
Intensive ultra-shallow tillage with CrossCutter Disc

Intensive ultra-shallow tillage

CrossCutter Disc performs outstanding in oilseed rape stubble and in cover crops, while also enabling great advantages in grain stubble as well as on ploughed land. Because of its disc shape and high quality Swedish steel, CrossCutter Disc provides full cut-out and intensive mixing at shallow working depth. This means that an extensive stale seedbed is created over the entire field.

Read more
Väderstad Carrier offers great mobility

Great mobility

Carrier 300-400 is mounted on the three-point linkage, offering ease of operation and great manoeuvrability. 

You benefit from a small turning radius on headlands and convenient transport between fields.

Read more
Trailed or mounted – you choose

Trailed or mounted – you choose

Equipped with the packer RubberRunner, Carrier 300-400 can be delivered as a trailed version. This takes weight off the tractor and reduces the lifting requirement. The weight is distributed between the tractor and the disc cultivator, which in turn reduces the soil compaction rate.

Read more
Väderstad CrossBoard levels the field

The CrossBoard levels

To increase its levelling capacity, the trailed Carrier 300-400 can be equipped with a hydraulic CrossBoard Heavy fitted with a double acting stabilising bar.

Read more
Väderstad BioDrill turns Carrier into a seed drill

BioDrill turns Carrier into a seed drill

Equipped with the mountable small-seeder BioDrill, Carrier 300-400 is able to establish a small seeded crop, such as cover crops or oilseed rape.

By drilling directly after harvesting you benefit from preserved soil moisture, while also saving both time and diesel in a busy period.

Read more

Product concept

Zone 1 - Intensive cutting and mixing

Two rows of high quality V-55 hardened Swedish steel discs aggressively cuts and mixes harvest residues down to 12cm working depth. The conical shape of the discs ensures a long working life and good crumbling of the soil.

CrossCutter Disc

CrossCutter Disc Aggressive

450mm discs

TrueCut 470mm discs

CrossBoard Heavy (Trailed models)

Zone 2 - Reconsolidation

Carrier can be equipped with a wide range of packers, suitable for a wide range of field conditions. The rubber suspension on the packer absorbs shocks and extends the working life of the frame and the packer.

RubberRunner

Single SteelRunner

CageRunner

Single SoilRunner

Following harrow

Technical data

 Carrier 300 350 400 300 350 400  
  Hydraulically carried Trailed  
Effective working width (m) 3 3,19 3,64 3 3,19 3,64  
Packer width (m) 3,0 3,5 4,0 3,0 3,5 4,0  
Transport width (m) 3,0 3,5 4,0 3,0 3,5 4,0  
Transport height (m) 1,4 1,4 1,4 1,4 1,4 1,4  
Weight with SteelRunner (kg) 1800 2000 2200 N/A N/A N/A  
Weight with CageRunner (kg) 1400 1600 N/A N/A N/A N/A  
Weight with RubberRunner (kg) 1600 1800 2000 1900 2100 2300  
Weight with single SoilRunner (kg) 1500 1700 1800 N/A N/A N/A  
Number of discs 24 26 30 24 26 30  
Disc spacing (cm) 25 25 25 25 25 25  
Disc angle 16 16 16 16 16 16  
Brakes N/A N/A N/A N/A N/A N/A  
Recommended working speed (km/h) 10-14 10-14 10-14 10-14 10-14 10-14  
Wheel dimension (transport wheels)  N/A N/A N/A N/A N/A N/A  
Hydraulic requirements (DA) 1 1 1 1-2 1-2 1-2  
Draught requirements from (hp) 85 100 110 85 100 110  
Väderstad has made every attempt to accurately portray our product lineup. However, due to our commitment to continually innovate our technologies to provide our customers the best possible products, some products may not be manufactured as shown on this site. Exact specifications for each product will be confirmed at the time of ordering.
 
LS = Load sensing    FR = Free return     DA = Double acting 
H = Hydraulic    P = Pneumatic    N/A = Not available
Read more

Search product documents

Are you looking for product documents such as Manuals, Spare part books or Quick starts for your Väderstad product? Manuals and Spare Part books are available for all products we produced since 1962.

Use our search!

Explore related content